A general strategy for preparing pyrrolic-N4 type single-atom catalysts via pre-located isolated atoms.

Single-atom catalysts (SACs) have been applied in many fields due to their superior catalytic performance. Because of the unique properties of the single-atom-site, using the single atoms as catalysts to synthesize SACs is promising. In this work, we have successfully achieved Co1 SAC using Pt1 atoms as catalysts. More importantly, this synthesis strategy can be extended to achieve Fe and Ni SACs as well. X-ray absorption spectroscopy (XAS) results demonstrate that the achieved Fe, Co, and Ni SACs are in a M1-pyrrolic N4 (M= Fe, Co, and Ni) structure. Density functional theory (DFT) studies show that the Co(Cp)2 dissociation is enhanced by Pt1 atoms, thus leading to the formation of Co1 atoms instead of nanoparticles. These SACs are also evaluated under hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and the nature of active sites under HER are unveiled by the operando XAS studies. These new findings extend the application fields of SACs to catalytic fabrication methodology, which is promising for the rational design of advanced SACs.

Insight into Ion Diffusion Dynamics/Mechanisms and Electronic Structure of Highly Conductive Sodium-Rich Na3+xLaxZr2-xSi2PO12 (0 ≤ x ≤ 0.5) Solid-State Electrolytes.

Solid-state electrolytes (SSEs) have attracted considerable attention as an alternative for liquid electrolytes to improve safety and durability. Sodium Super Ionic CONductor (NASICON)-type SSEs, typically Na3Zr2Si2PO12, have shown great promise because of their high ionic conductivity and low thermal expansivity. Doping La into the NASICON structure can further elevate the ionic conductivity by an order of magnitude to several mS/cm. However, the underlying mechanism of ionic transportation enhancement has not yet been fully disclosed. Herein, we fabricate a series of Na3+xLaxZr2-xSi2PO12 (0 ≤ x ≤ 0.5) SSEs. The electronic and local structures of constituent elements are studied via synchrotron-based X-ray absorption spectroscopy, and the ionic dynamics and Na-ion conduction mechanism are investigated by solid-state nuclear magnetic resonance spectroscopy. The results prove that La3+ ions exist in the form of phosphate impurities such as Na3La(PO4)2 instead of occupying the Zr4+ site. As a result, the increased Si/P ratio in the NASICON phase, accompanied by an increase in the sodium ion occupancy, makes a major contribution to the enhancement of ionic conductivity. The spin-lattice relaxation time study confirms the accelerated Na+ motions in the altered NASICON phase. Modifications on the Si/P composition can be a promising strategy to enhance the ionic conductivity of NASICON.

Unveiling the Nature of Pt Single-Atom Catalyst during Electrocatalytic Hydrogen Evolution and Oxygen Reduction Reactions.

Single-atom catalysts (SACs) have attracted significant attention due to their superior catalytic activity and selectivity. However, the nature of active sites of SACs under realistic reaction conditions is ambiguous. In this work, high loading Pt single atoms on graphitic carbon nitride (g-C3 N4 )-derived N-doped carbon nanosheets (Pt1 /NCNS) is achieved through atomic layer deposition. Operando X-ray absorption spectroscopy (XAS) is performed on Pt single atoms and nanoparticles (NPs) in both the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). The operando results indicate that the total unoccupied density of states of Pt 5d orbitals of Pt1 atoms is higher than that of Pt NPs under HER condition, and that a stable Pt oxide is formed during ORR on Pt1 /NCNS, which may suppress the adsorption and activation of O2 . This work unveils the nature of Pt single atoms under realistic HER and ORR conditions, providing a deeper understanding for designing advanced SACs.

New Insight of Pyrrole-Like Nitrogen for Boosting Hydrogen Evolution Activity and Stability of Pt Single Atoms.

Single atomic Pt catalysts exhibit particularly high hydrogen evolution reaction (HER) activity compared to conventional nanomaterial-based catalysts. However, the enhanced mechanisms between Pt and their coordination environment are not understood in detail. Hence, a systematic study examining the different types of N in the support is essential to clearly demonstrate the relationship between Pt single atoms and N-doped support. Herein, three types of carbon nanotubes with varying types of N (pyridine-like N, pyrrole-like N, and quaternary N) are used as carbon support for Pt single atom atomic layer deposition. The detailed coordination environment of the Pt single atom catalyst is carefully studied by electron microscope and X-ray absorption spectra (XAS). Interestingly, with the increase of pyrrole-like N in the CNT support, the HER activity of the Pt catalyst also improves. First principle calculations results indicate that the interaction between the dyz and s orbitals of H and sp3 hybrid orbital of N should be the origin of the superior HER performance of these Pt single atom catalysts (SACs).

Engineering the Low Coordinated Pt Single Atom to Achieve the Superior Electrocatalytic Performance toward Oxygen Reduction.

Configuring metal single-atom catalysts (SACs) with high electrocatalytic activity and stability is one efficient strategy in achieving the cost-competitive catalyst for fuel cells' applications. Herein, the atomic layer deposition (ALD) strategy for synthesis of Pt SACs on the metal-organic framework (MOF)-derived N-doped carbon (NC) is proposed. Through adjusting the ALD exposure time of the Pt precursor, the size-controlled Pt catalysts, from Pt single atoms to subclusters and nanoparticles, are prepared on MOF-NC support. X-ray absorption fine structure spectra determine the increased electron vacancy in Pt SACs and indicate the Pt-N coordination in the as-prepared Pt SACs. Benefiting from the low-coordination environment and anchoring interaction between Pt atoms and nitrogen-doping sites from MOF-NC support, the Pt SACs deliver an enhanced activity and stability with 6.5 times higher mass activity than that of Pt nanoparticle catalysts in boosting the oxygen reduction reaction (ORR). Density functional theory calculations indicate that Pt single atoms prefer to be anchored by the pyridinic N-doped carbon sites. Importantly, it is revealed that the electronic structure of Pt SAs can be adjusted by adsorption of hydroxyl and oxygen, which greatly lowers free energy change for the rate-determining step and enhances the activity of Pt SACs toward the ORR.

Temperature-Dependent Chemical and Physical Microstructure of Li Metal Anodes Revealed through Synchrotron-Based Imaging Techniques.

The Li metal anode has been long sought-after for application in Li metal batteries due to its high specific capacity (3860 mAh g-1 ) and low electrochemical potential (-3.04 V vs the standard hydrogen electrode). Nevertheless, the behavior of Li metal in different environments has been scarcely reported. Herein, the temperature-dependent behavior of Li metal anodes in carbonate electrolyte from the micro- to macroscales are explored with advanced synchrotron-based characterization techniques such as X-ray computed tomography and energy-dependent X-ray fluorescence mapping. The importance of testing methodology is exemplified, and the electrochemical behavior and failure modes of Li anodes cycled at different temperatures are discussed. Moreover, the origin of cycling performance at different temperatures is identified through analysis of Coulombic efficiencies, surface morphology, and the chemical composition of the solid electrolyte interphase in quasi-3D space with energy-dependent X-ray fluorescence mappings coupled with micro-X-ray absorption near edge structure. This work provides new characterization methods for Li metal anodes and serves as an important basis toward the understanding of their electrochemical behavior in carbonate electrolytes at different temperatures.

Size-Mediated Recurring Spinel Sub-nanodomains in Li- and Mn-Rich Layered Cathode Materials.

Li- and Mn-rich layered oxides are among the most promising cathode materials for Li-ion batteries with high theoretical energy density. Its practical application is, however, hampered by the capacity and voltage fade after long cycling. Herein, a finite difference method for near-edge structure (FDMNES) code was combined with in situ X-ray absorption spectroscopy (XAS) and transmission electron microscopy/electron energy loss spectroscopy (TEM/EELS) to investigate the evolution of transition metals (TMs) in fresh and heavily cycled electrodes. Theoretical modeling reveals a recurring partially reversible LiMn2 O4 -like sub-nanodomain formation/dissolution process during each charge/discharge, which accumulates gradually and accounts for the Mn phase transition. From the modeling of spectra and maps of the valence state over large regions of the cathodes, it was found that the phase change is size-dependent. After prolonged cycling, the TMs displayed different levels of inactivity.

Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction.

Single atom catalysts exhibit particularly high catalytic activities in contrast to regular nanomaterial-based catalysts. Until recently, research has been mostly focused on single atom catalysts, and it remains a great challenge to synthesize bimetallic dimer structures. Herein, we successfully prepare high-quality one-to-one A-B bimetallic dimer structures (Pt-Ru dimers) through an atomic layer deposition (ALD) process. The Pt-Ru dimers show much higher hydrogen evolution activity (more than 50 times) and excellent stability compared to commercial Pt/C catalysts. X-ray absorption spectroscopy indicates that the Pt-Ru dimers structure model contains one Pt-Ru bonding configuration. First principle calculations reveal that the Pt-Ru dimer generates a synergy effect by modulating the electronic structure, which results in the enhanced hydrogen evolution activity. This work paves the way for the rational design of bimetallic dimers with good activity and stability, which have a great potential to be applied in various catalytic reactions.

Author Correction: Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Water-Mediated Synthesis of a Superionic Halide Solid Electrolyte.

To promote the development of solid-state batteries, polymer-, oxide-, and sulfide-based solid-state electrolytes (SSEs) have been extensively investigated. However, the disadvantages of these SSEs, such as high-temperature sintering of oxides, air instability of sulfides, and narrow electrochemical windows of polymers electrolytes, significantly hinder their practical application. Therefore, developing SSEs that have a high ionic conductivity (>10-3  S cm-1 ), good air stability, wide electrochemical window, excellent electrode interface stability, low-cost mass production is required. Herein we report a halide Li+ superionic conductor, Li3 InCl6 , that can be synthesized in water. Most importantly, the as-synthesized Li3 InCl6 shows a high ionic conductivity of 2.04×10-3  S cm-1 at 25 °C. Furthermore, the ionic conductivity can be recovered after dissolution in water. Combined with a LiNi0.8 Co0.1 Mn0.1 O2 cathode, the solid-state Li battery shows good cycling stability.

Highly Stable Lithium Metal Anode Interface via Molecular Layer Deposition Zircone Coatings for Long Life Next-Generation Battery Systems.

Herein, molecular layer deposition is used to form a nanoscale "zircone" protective layer on Li metal to achieve stable and long life Li metal anodes. The zircone-coated Li metal shows enhanced air stability, electrochemical performance and high rate capability in symmetrical cell testing. Moreover, as a proof of concept, the protected Li anode is used in a next-generation Li-O2 battery system and is shown to extend the lifetime by over 10-fold compared to the batteries with untreated Li metal. Furthermore, in-situ synchrotron X-ray absorption spectroscopy is used for the first time to study an artificial SEI on Li metal, revealing the electrochemical stability and lithiation of the zircone film. This work exemplifies significant progress towards the development and understanding of MLD thin films for high performance next-generation batteries.

Suppressing Corrosion of Aluminum Foils via Highly Conductive Graphene-like Carbon Coating in High-Performance Lithium-Based Batteries.

Aluminum foil is the predominant cathodic current collector in lithium-based batteries due to the high electronic conductivity, stable chemical/electrochemical properties, low density, and low cost. However, with the development of next-generation lithium batteries, Al current collectors face new challenges, such as the requirement of increased chemical stability at high voltage, long-cycle-life batteries with different electrolyte systems, as well as improved electronic conductivity and adhesion for new electrode materials. In this study, we demonstrate a novel graphene-like carbon (GLC) coating on the Al foil in lithium-based batteries. Various physical and electrochemical characterizations are conducted to reveal the electronic conductivity and electrochemical stability of the GLC-Al foil in both carbonate- and ether-based electrolytes. Full-cell tests, including Li-S batteries and high-voltage Li-ion batteries, are performed to demonstrate the significantly improved cycling and rate performance of batteries with the use of the GLC-Al foil as current collectors. The cell using the GLC-Al foil can greatly reduce the potential polarization in Li-S batteries and can obtain a reversible capacity of 750 mAh g-1 over 100 cycles at 0.5C. Even with high-sulfur-loading cathodes, the Li-S battery at 1C still maintains over 500 mAh g-1 after 100 cycles. In high-voltage Li-ion batteries, the GLC-Al foil significantly improves the high-rate performance, showing an increased retained capacity by over 100 mAh g-1 after 450 cycles at 1C compared to the bare foil. It is believed that the developed GLC-Al foil brings new opportunities to enhance the battery life of lithium-based batteries.

Unveiling the Interfacial Instability of the Phosphorus/Carbon Anode for Sodium-Ion Batteries.

As a competitive anode material for sodium-ion batteries (SIBs), a commercially available red phosphorus, featured with a high theoretical capacity (2596 mA h g-1) and a suitable operating voltage plateau (0.1-0.6 V), has been confronted with a severe structural instability and a rapid capacity degradation upon large volumetric change. In particular, the fundamental determining factors for phosphorus anode materials are yet poorly understood, and their interfacial stability against ambient air has not been explored and clarified. Herein, a high-performance phosphorus/carbon anode material has been fabricated simply through ball-milling the carbon black and red phosphorus, delivering a high reversible capacity of 1070 mA h g-1 at 400 mA g-1 after 200 cycles and a superior rate capability of 479 mA h g-1 at 3200 mA g-1. More importantly, we first reveal the significance of inhibiting the exposure of phosphorus/carbon electrode materials to air, even for a short period, for achieving a good electrochemical performance, which would sharply decrease the reversible capacities. With the assistance of synchrotron-based X-ray techniques, the formation and accumulation of insulating phosphate compounds can be spectroscopically identified, leading to the decay of electrochemical performance. At the same time, these passivation layers on the surface of electrode were found to occur via a self-oxidation process in ambient air. To maintain the electrochemical advantages of phosphorus anodes, it is necessary to inhibit their contact with air through a rational coating or an optimal storage condition. Additionally, the employment of a fluoroethylene carbonate (FEC) additive facilitates the decomposition of the electrolyte and favors the formation of a robust solid electrolyte interphase layer, which may suppress the side reactions between the active Na-P compounds and the electrolyte. These findings could help improve the surface protection and interfacial stability of phosphorus anodes for high-performance SIBs.

Promoting the Transformation of Li2 S2 to Li2 S: Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li-S Batteries.

Lithium-sulfur (Li-S) batteries with high sulfur loading are urgently required in order to take advantage of their high theoretical energy density. Ether-based Li-S batteries involve sophisticated multistep solid-liquid-solid-solid electrochemical reaction mechanisms. Recently, studies on Li-S batteries have widely focused on the initial solid (sulfur)-liquid (soluble polysulfide)-solid (Li2 S2 ) conversion reactions, which contribute to the first 50% of the theoretical capacity of the Li-S batteries. Nonetheless, the sluggish kinetics of the solid-solid conversion from solid-state intermediate product Li2 S2 to the final discharge product Li2 S (corresponding to the last 50% of the theoretical capacity) leads to the premature end of discharge, resulting in low discharge capacity output and low sulfur utilization. To tackle the aforementioned issue, a catalyst of amorphous cobalt sulfide (CoS3 ) is proposed to decrease the dissociation energy of Li2 S2 and propel the electrochemical transformation of Li2 S2 to Li2 S. The CoS3 catalyst plays a critical role in improving the sulfur utilization, especially in high-loading sulfur cathodes (3-10 mg cm-2 ). Accordingly, the Li2 S/Li2 S2 ratio in the discharge products increased to 5.60/1 from 1/1.63 with CoS3 catalyst, resulting in a sulfur utilization increase of 20% (335 mAh g-1 ) compared to the counterpart sulfur electrode without CoS3 .

Chemical-to-Electricity Carbon: Water Device.

The ability to release, as electrical energy, potential energy stored at the water:carbon interface is attractive, since water is abundant and available. However, many previous reports of such energy converters rely on either flowing water or specially designed ionic aqueous solutions. These requirements restrict practical application, particularly in environments with quiescent water. Here, a carbon-based chemical-to-electricity device that transfers the chemical energy to electrical form when coming into contact with quiescent deionized water is reported. The device is built using carbon nanotube yarns, oxygen content of which is modulated using oxygen plasma-treatment. When immersed in water, the device discharges electricity with a power density that exceeds 700 mW m-2 , one order of magnitude higher than the best previously published result. X-ray absorption and density functional theory studies support a mechanism of operation that relies on the polarization of sp2 hybridized carbon atoms. The devices are incorporated into a flexible fabric for powering personal electronic devices.

Formation of size-dependent and conductive phase on lithium iron phosphate during carbon coating.

Carbon coating is a commonly employed technique for improving the conductivity of active materials in lithium ion batteries. The carbon coating process involves pyrolysis of organic substance on lithium iron phosphate particles at elevated temperature to create a highly reducing atmosphere. This may trigger the formation of secondary phases in the active materials. Here, we observe a conductive phase during the carbon coating process of lithium iron phosphate and the phase content is size, temperature, and annealing atmosphere dependent. The formation of this phase is related to the reducing capability of the carbon coating process. This finding can guide us to control the phase composition of carbon-coated lithium iron phosphate and to tune its quality during the manufacturing process.

Atomic Layer Deposition of Lithium Niobium Oxides as Potential Solid-State Electrolytes for Lithium-Ion Batteries.

The development of solid-state electrolytes by atomic layer deposition (ALD) holds unparalleled advantages toward the fabrication of next-generation solid-state batteries. Lithium niobium oxide (LNO) thin films with well-controlled film thickness and composition were successfully deposited by ALD at a deposition temperature of 235 °C using lithium tert-butoxide and niobium ethoxide as Li and Nb sources, respectively. Furthermore, incorporation of higher Li content was achieved by increasing the Li-to-Nb subcycle ratio. In addition, detailed X-ray absorption near edge structure studies of the amorphous LNO thin films on the Nb L-edge revealed the existence of Nb as Nb5+ in a distorted octahedral structure. The octahedrons in niobium oxide thin films experienced severe distortions, which could be gradually alleviated upon the introduction of Li atoms into the thin films. The ionic conductivities of the as-prepared LNO thin films were also measured, with the highest value achieving 6.39 × 10-8 S cm-1 at 303 K with an activation energy of 0.62 eV.

Nanoscale Manipulation of Spinel Lithium Nickel Manganese Oxide Surface by Multisite Ti Occupation as High-Performance Cathode.

A novel two-step surface modification method that includes atomic layer deposition (ALD) of TiO2 followed by post-annealing treatment on spinel LiNi0.5 Mn1.5 O4 (LNMO) cathode material is developed to optimize the performance. The performance improvement can be attributed to the formation of a TiMn2 O4 (TMO)-like spinel phase resulting from the reaction of TiO2 with the surface LNMO. The Ti incorporation into the tetrahedral sites helps to combat the impedance growth that stems from continuous irreversible structural transition. The TMO-like spinel phase also alleviates the electrolyte decomposition during electrochemical cycling. 25 ALD cycles of TiO2 growth are found to be the optimized parameter toward capacity, Coulombic efficiency, stability, and rate capability enhancement. A detailed understanding of this surface modification mechanism has been demonstrated. This work provides a new insight into the atomic-scale surface structural modification using ALD and post-treatment, which is of great importance for the future design of cathode materials.

How to Control the Discharge Products in Na-O2 Cells: Direct Evidence toward the Role of Functional Groups at the Air Electrode Surface.

Sodium-oxygen batteries have received a significant amount of research attention as a low-overpotential alternative to lithium-oxygen. However, the critical factors governing the composition and morphology of the discharge products in Na-O2 cells are not thoroughly understood. Here we show that oxygen containing functional groups at the air electrode surface have a substantial role in the electrochemical reaction mechanisms in Na-O2 cells. Our results show that the presence of functional groups at the air-electrode surface conducts the growth mechanism of discharge products toward a surface-mediated mechanism, forming a conformal film of products at the electrode surface. In addition, oxygen reduction reaction at hydrophilic surfaces more likely passes through a peroxide pathway, which results in the formation of peroxide-based discharge products. Moreover, in-line X-ray diffraction combined with solid state 23Na NMR results indicate the instability of discharge products against carbonaceous electrodes. The findings of this study help to explain the inconsistency among various reports on composition and morphology of the discharge products in Na-O2 cells and allow the precise control over the discharge products.

Platinum single-atom and cluster catalysis of the hydrogen evolution reaction.

Platinum-based catalysts have been considered the most effective electrocatalysts for the hydrogen evolution reaction in water splitting. However, platinum utilization in these electrocatalysts is extremely low, as the active sites are only located on the surface of the catalyst particles. Downsizing catalyst nanoparticles to single atoms is highly desirable to maximize their efficiency by utilizing nearly all platinum atoms. Here we report on a practical synthesis method to produce isolated single platinum atoms and clusters using the atomic layer deposition technique. The single platinum atom catalysts are investigated for the hydrogen evolution reaction, where they exhibit significantly enhanced catalytic activity (up to 37 times) and high stability in comparison with the state-of-the-art commercial platinum/carbon catalysts. The X-ray absorption fine structure and density functional theory analyses indicate that the partially unoccupied density of states of the platinum atoms' 5d orbitals on the nitrogen-doped graphene are responsible for the excellent performance.